| | Name | Description |
|---|
 | AutopoweroffTime |
The time in seconds before the Bridgemate will power off.
|
| AutoShutDownBPC |
Defines if BCS should automatically shut down when all results are in.
|
| BM2AutoBoardNumber |
Defines if the Brigemate should enter the board number automatically..
|
| BM2AutoShowScoreRecap |
Defines if the Bridgemate should show the score recap wihtout promptimg after the last board of the round has been played..
|
| BM2ConfirmNP |
Defines if the TD must confirm No Play on the Bridgemate.
|
| BM2EnterHandRecord |
Determines if the players can enter the handrecord for boards they played if not present.
|
| BM2EnterHandRecordWhen |
If BM2EnterHandRecord is "True" determines if the players can enter the handrecord after play of the board or after playing all boards for the round.
|
| BM2FirstBoardManually |
If BM2AutoBoardNumber is "True" defines if the boardnumber of the first board should be entered manually. The subsequent boards will be filled in automatically.
|
| BM2GameSummary |
Enable/disable the summary after end of session. (Enabled requires BM2Ranking=1 or 2
|
| BM2NameSource |
Currently not supported.
|
| BM2NextSeatings |
Defines if the Bridgemate should show the seatings for the next round.
|
| BM2NumberEntryEachRound |
Defines if the players must enter their player number each round.
|
| BM2NumberEntryPreloadValues |
Currently not supported.
|
| BM2PairNumberEntry |
Defines if the players can or must enter the pair number when entering the declaring side for a contract.
Enforcing this helps in detecting switched seatings.
|
| BM2PINcode |
The pincode that the TD must enter before accessing the TD menu on the Bridgemate.
Must be four digits.
|
| BM2Ranking |
Determines if the Bridgemate should show the ranking and if so after play of the last board of a round or after play of the last board of the session..
|
| BM2RecordBidding |
Currently not supported.
|
| BM2RecordPlay |
Currently not supported.
|
| BM2RemainingBoards |
Defines if the Bridgemate should show how many boards in the round are left to play.
|
| BM2ResetFunctionKey |
Determines if the "Reset" key is available to the players, rather than to the TD only.
|
| BM2ResultsOverview |
Determines how the results overview will be formatted on the display.
|
| BM2ScoreCorrection |
Defines if the players can correct scores themselves. If not the TD must be called to the table to do this.
|
| BM2ScoreRecap |
Defines if the Bridgemate can show the scores obtained during the round when a player presses the appropriate button on the Bridgemate.
|
| BM2ShowHands |
Currently not suppoorted.
|
| BM2ShowPlayerNames |
Determines if the Bridgemate shows the names of the players and if so at the start of each round or in the first round only.
|
| BM2SummaryPoints |
Defines if matchpoints or the percentage should be shown in the game summary.
|
| BM2TDCall |
Defines if the "Call TD" button is visible on the Bridgemate.
|
| BM2TextBasedNumber |
Currently not supported.
|
| BM2ValidateLeadCard |
Determines if the entry of the leadcard should be checked against the handrecord.
|
| BM2ValidateRecording |
Currently not supported.
|
| BM2ViewHandRecord |
Determines if the players can see the handrecord of the board they just played.
|
| BoardOrderVerification |
Defines if the Bridgemate should check the order of play.
|
| EnterResultsMethod |
Defines the way resulting tricks are enterd after the board has been played.
|
| GroupSections |
Currently not supported. Use the ScoringGroupDTO to group sections.
|
| HandRecordValidation |
Currently not supported.
|
| IntermediateResults |
Currently not supported.
|
| LeadCard |
Defines if the leadcard should be entered.
|
| MaximumResults |
If ShowResults is "True" determines the maximum number of results that will be shown.
|
| MemberNumbers |
Defines if the players can make themselves know by entering their player number on the Bridgemate.
|
| MemberNumbersNoBlankEntry |
If "True" all players must have been identified by their player number.
|
| NumberValidation |
Currently not supported
|
| RepeatResults |
Ask after showing the results if the overview should be repeated.
|
| ScorePoints |
Show the point score of a result from the declarer's perspective or from that of North-South.
|
| ShowContract |
Show the denomination of the contract as letters or as suit symbols.
|
| ShowOwnResult |
Include the own result in the results overview.
|
| ShowPairNumbers |
Determines if the pairnumbers are shown at the top of the Bridgemate.
|
| ShowPercentage |
Show percentage rather than matchpoints.
|
| ShowResults |
Show results obtained on other rounds and on other tables.
|
| VerificationTime |
The time in seconds that the message that the opponents must confirm the entered result is shown.
|
Properties